About Amshield Deck
Amshield Deck is a 100% Solids, two component Polyurethane Coating system that contains no solvents, noxious smells and is non-flammable. It has been formulated specifically as a high-performance Parking Deck, Industrial Floor & Clean Room Floor Coating. Amshield Deck provides long term protection to your concrete floors. Once coated, the floor resistant to impact, abrasion, chemicals, dust generation. X-Bac variants containing anti-microbial agents will kill microbes on contact making it invaluable for food processing, hospitals, Pharma and clean rooms.
Despite its hardness and toughness and unlike brittle Epoxy floors, Amshield is elastic which eliminates cracking on heavy load impact. It comes in two variants 75E (with approx. 75% Elongation and 70 Shore D Hardness) for Parking Decks & General Industrial and 15E (with approx. 15% Elongation and 80 Shore D Hardness) for Heavy Industrial use.
Applied as a thick film (1.50 - 3.00 mm), this premium, high performance product has a very high service life.
Seamless Membrane, Easy To Apply
Liquid polyurethane applied as a seamless, monolithic membrane to a thickness of 1.50 – 3.00 mm. Simply mix the two components, pour and spread using roller to specified thickness in one or two coats. Special two component 100% Solids Damp Tolerant Polyurethane Primer will seal concrete prior to application of Amshield Deck main coat. Unlike other Polyurethane floor coatings, the hydrophobic nature of Amshield allows application even in high humidity environments without blistering.
Smooth, Easy to Clean
Smooth finish allows minimal dirt accumulation and an easy to clean surface. Available in Gloss, Matt and Textured Anti-Skid surface.
Excellent Chemical Resistance
Amshield Deck is highly resistant to a wide variety of Acid, Alkalis, Salts, Alcohol, Petrol, Diesel, Oil, Grease etc. In most cases, they are even suitable for immersion in these media!! 15E has even higher resistance to Alkalis and Solvents.
Tough, Durable Film
Amshield Deck film is a very tough, durable membrane. 75E has a tensile strength of approx. 20 N/mm2 (2,900 Psi), hardness of 70+ Shore D and elongation @ break of approx. 75%. 15E has a tensile strength of approx. 27.50 N/mm2 (4,000 Psi), hardness of 80+ Shore D and elongation @ break of approx. 15%.
Highly Abrasion Resistant
Being hard and yet elastic, Polyurethane’s can dissipate strain and have the highest wear resistance. Rigid coatings will wear out much faster. The sports shoe Polyurethane sole lasts forever compared to the hard-sole shoe. In Taber Abraser wear tests, Amshield Deck will lose < 100 mgs /1000 cycles (1000 gms. weight) compared to 200-300 mgs/ 1000 cycles) for Epoxy Flooring.
Elastic Nature, Crack Spanning
75E is an Elastic membrane with >75% elongation. It is unaffected by temperature cycling and will span hairline cracks in concrete. Brittle products such as Epoxy will simply crack in service.
Bonds strongly to the substrate. In pull off tests, break takes place within the concrete and not at the interface. Adherent films will not peel off at edges and transitions.
X-Bac variants contain anti-microbial agents which kill fungi, bacteria and algae on contact. The anti-microbial agent is non-toxic containing no phenols, tin, lead, heavy metals etc. On contact with the microorganism, the anti-microbial agent will work by disrupting the cell membrane and destroys the microbial cell. This makes it ideal for keeping hospitals, clean rooms, food processing, pharma industry free from microbial contamination.
Find us at the office
A-79, Sector 58, Noida, India, 201307
Give us a call
Landline: +91 0120 4325540
Sachit: +91 8826458060
Shoot us an email